Determining by Raman spectroscopy the average thickness and N-layer-specific surface coverages of MoS₂ thin films with domains much smaller than the laser spot size

• Felipe Wasem Klein,
• Jean-Roch Huntzinger,
• Vincent Astié,
• Damien Voiry,
• Romain Parret,
• Houssine Makhlouf,
• Sandrine Juillaguet,
• Jean-Manuel Decams,
• Sylvie Contreras,
• Périne Landois,
• Ahmed-Azmi Zahab,
• Jean-Louis Sauvajol and
• Matthieu Paillet

Beilstein J. Nanotechnol. 2024, 15, 279–296, doi:10.3762/bjnano.15.26

Two-dimensional semiconductors pave the way towards dopant-based quantum computing

• José Carlos Abadillo-Uriel,
• Belita Koiller and
• María José Calderón

Beilstein J. Nanotechnol. 2018, 9, 2668–2673, doi:10.3762/bjnano.9.249

• hybrid qubit [14], optical manipulation [15] and dipole coupling with electrons [16] or holes [17][18]. Here we propose an alternative that relies on two-dimensional (2D) semiconductor materials instead of bulk Si as host material. A precise positioning of donors on a surface may be simpler than in the

Facile phase transfer of gold nanorods and nanospheres stabilized with block copolymers

• Yaroslav I. Derikov,
• Georgiy A. Shandryuk,
• Raisa V. Talroze,
• Alexander A. Ezhov and
• Yaroslav V. Kudryavtsev

Beilstein J. Nanotechnol. 2018, 9, 616–627, doi:10.3762/bjnano.9.58

• the use of strong thiol and amine surfactants. Keywords: Au nanorods; block copolymers; optical absorbance spectroscopy; phase transfer; seeded growth method; Introduction The size effects that determine the functional characteristics of nanoparticles are no less important than their precise

• positioning in host matrices. Control over the size, shape and surface of nanoparticles is an effective tool that can be used in bottom up approaches for the fabrication of composite materials [1][2]. An optimal strategy of nanoparticle synthesis should account for their target application. For example, block

Gas-assisted silver deposition with a focused electron beam

• Luisa Berger,
• Katarzyna Madajska,
• Iwona B. Szymanska,
• Katja Höflich,
• Mikhail N. Polyakov,
• Jakub Jurczyk,
• Carlos Guerra-Nuñez and
• Ivo Utke

Beilstein J. Nanotechnol. 2018, 9, 224–232, doi:10.3762/bjnano.9.24

• diameter was chosen. For precise positioning, the GIS was fixed inside the chamber on a three-axis stage. The GIS was positioned at 200 µm lateral distance to the deposit and approximately 2 mm above the substrate. High resolution scanning electron microscopy and energy-dispersive X-ray spectroscopy (EDX

Design of photonic microcavities in hexagonal boron nitride

• Sejeong Kim,
• Milos Toth and
• Igor Aharonovich

Beilstein J. Nanotechnol. 2018, 9, 102–108, doi:10.3762/bjnano.9.12

• cavity mode, even moderate Q values of 20,000 (≈20 GHz linewidth), will yield a Purcell enhancement of ≈530. To realize the high Purcell enhancement experimentally, techniques for precise positioning of SPEs to the maximum intensity of the cavity mode are required. Two different approaches can suggest

Localized growth of carbon nanotubes via lithographic fabrication of metallic deposits

• Fan Tu,
• Martin Drost,
• Imre Szenti,
• Janos Kiss,
• Zoltan Kónya and
• Hubertus Marbach

Beilstein J. Nanotechnol. 2017, 8, 2592–2605, doi:10.3762/bjnano.8.260

• fabrication of catalytically active deposits for the subsequent growth of corresponding CNTs with precise positioning. In FEBIP the focused electron beam of an electron microscope, here a scanning electron microscope (SEM), is used to very locally modify adsorbed precursor molecules or the substrate itself

Direct writing of gold nanostructures with an electron beam: On the way to pure nanostructures by combining optimized deposition with oxygen-plasma treatment

• Domagoj Belić,
• Mostafa M. Shawrav,
• Emmerich Bertagnolli and
• Heinz D. Wanzenboeck

Beilstein J. Nanotechnol. 2017, 8, 2530–2543, doi:10.3762/bjnano.8.253

• well as in nanomedicine [30]. Many applications require precise positioning of Au structures on the nanoscale, e.g., for fabrication of interconnects [31][32] and field emission tips [33] or in direct writing of plasmonic and photonic nanostructures and devices [4][34][35][36][37][38][39][40]. We

Dielectrophoresis of gold nanoparticles conjugated to DNA origami structures

• Anja Henning-Knechtel,
• Matthew Wiens,
• Mathias Lakatos,
• Andreas Heerwig,
• Frieder Ostermaier,
• Nora Haufe and
• Michael Mertig

Beilstein J. Nanotechnol. 2016, 7, 948–956, doi:10.3762/bjnano.7.87

• this aim, one important task is the precise positioning and alignment of DNA structures on technically patterned surfaces, e.g., their controlled deposition into microstructured electrode arrays. Recent studies address the alignment of DNA nanostructures to pre-structured surfaces that include (i

Optical absorption signature of a self-assembled dye monolayer on graphene

• Tessnim Sghaier,
• Sylvain Le Liepvre,
• Céline Fiorini,
• Ludovic Douillard and
• Fabrice Charra

Beilstein J. Nanotechnol. 2016, 7, 862–868, doi:10.3762/bjnano.7.78

• original photonic processes. An atomically precise positioning of self-associated molecular dyes can be achieved either in vacuum or at the solution–substrate interface by self-assembly techniques. In particular, perylene-3,4,9,10-tetracarboxylic-3,4,9,10-diimide (PTCDI) and its sibling molecule perylene

Determination of Young’s modulus of Sb₂S₃ nanowires by in situ resonance and bending methods

• Liga Jasulaneca,
• Raimonds Meija,
• Alexander I. Livshits,
• Juris Prikulis,
• Subhajit Biswas,
• Justin D. Holmes and
• Donats Erts

Beilstein J. Nanotechnol. 2016, 7, 278–283, doi:10.3762/bjnano.7.25

• (SEM Hitachi S4800) for resonance and static bending experiments. The micro stepper-motor was used for rotation of the specimen for exact determination of NW cross-sectional dimensions and for precise positioning of the NW-countering tip system. For mechanical resonance measurements, an AC signal

DNA–melamine hybrid molecules: from self-assembly to nanostructures

• Rina Kumari,
• Shib Shankar Banerjee,
• Anil K. Bhowmick and
• Prolay Das

Beilstein J. Nanotechnol. 2015, 6, 1432–1438, doi:10.3762/bjnano.6.148

• an attractive molecular scaffold for the precise positioning of different molecules on the nanoscale [3][4]. DNA has been used to create nanostructures through hybridization-mediated self-assembly for molecular electronics and sensing applications [5][6][7]. DNA–organic hybrid structures have

Combination of surface- and interference-enhanced Raman scattering by CuS nanocrystals on nanopatterned Au structures

• Alexander G. Milekhin,
• Nikolay A. Yeryukov,
• Larisa L. Sveshnikova,
• Tatyana A. Duda,
• Ekaterina E. Rodyakina,
• Victor A. Gridchin,
• Evgeniya S. Sheremet and
• Dietrich R. T. Zahn

Beilstein J. Nanotechnol. 2015, 6, 749–754, doi:10.3762/bjnano.6.77

• in a backscattering geometry using a moving stage for precise positioning along the wedge-shaped sample in the direction of increasing thickness. Figure 2 shows the Raman spectra of CuS NCs recorded from areas with different SiO2 thickness. A significant periodic enhancement of the Raman scattering

Patterning a hydrogen-bonded molecular monolayer with a hand-controlled scanning probe microscope

• Matthew F. B. Green,
• Taner Esat,
• Christian Wagner,
• Philipp Leinen,
• Alexander Grötsch,
• F. Stefan Tautz and
• Ruslan Temirov

Beilstein J. Nanotechnol. 2014, 5, 1926–1932, doi:10.3762/bjnano.5.203

• the movements of an operator's hand to the sub-angstrom precise positioning of an SPM tip. Literally moving the tip by hand we write a nanoscale structure in a monolayer of large molecules, thereby showing that our method allows for the successful execution of complex manipulation protocols even when

• for a stable and precise positioning of the tip, while simultaneously measuring the current flowing through the junction (I) and the frequency shift of the oscillating tip (Δf). Measuring Δf provides additional information about the microscopic junction structure [15][16]. For the AFM functionality we

• fork used. The essence of our approach lies in the coupling of the sub-angstrom precise positioning of the tip of our instrument to the motion of the operator's hand [18]. This is achieved with the help of a commercial motion tracking system from VICON (see Figure 2). The VICON software was used to

Constant-distance mode SECM as a tool to visualize local electrocatalytic activity of oxygen reduction catalysts

• Michaela Nebel,
• Thomas Erichsen and
• Wolfgang Schuhmann

Beilstein J. Nanotechnol. 2014, 5, 141–151, doi:10.3762/bjnano.5.14

• [29][30]. The current measurement is performed at the tip and a further increase of the lateral resolution by utilization of smaller electrodes is therefore possible [29]. In order to enable a precise positioning of small electrodes also for the RC mode, the detection scheme was integrated in the 4D

• stop criterion is reached (Figure 4a). After precise positioning of the tip within the shearforce interaction regime, the resulting z-position is stored to visualize the sample topography (Figure 4b). The concept of 4D SF/CD-SECM provides the possibility to perform any anticipated electrochemical

Probing three-dimensional surface force fields with atomic resolution: Measurement strategies, limitations, and artifact reduction

• Mehmet Z. Baykara,
• Omur E. Dagdeviren,
• Todd C. Schwendemann,
• Harry Mönig,
• Eric I. Altman and
• Udo D. Schwarz

Beilstein J. Nanotechnol. 2012, 3, 637–650, doi:10.3762/bjnano.3.73

• of a piezoelectric scan tube employed as a precise positioning tool in scanning probe microscopes [38][39]. The tube itself (blue) is manufactured out of a piezoelectric material (usually lead zirconate titanate, PZT). Voltages applied to one of the four external metallic electrodes (grey; denoted

Distance dependence of near-field fluorescence enhancement and quenching of single quantum dots

• Volker Walhorn,
• Jan Paskarbeit,
• Heinrich Gotthard Frey,
• Alexander Harder and
• Dario Anselmetti

Beilstein J. Nanotechnol. 2011, 2, 645–652, doi:10.3762/bjnano.2.68

• dependence of Γexc was taken into consideration. a) Schematic image of the combined TIRFM–AFM setup. The AFM is placed on top of an inverted microscope. The subnanometer spatial resolution of the AFM piezo drive allows precise positioning relative to the sample surface. The incident laser is directed towards

Manipulation of gold colloidal nanoparticles with atomic force microscopy in dynamic mode: influence of particle–substrate chemistry and morphology, and of operating conditions

• Samer Darwich,
• Karine Mougin,
• Akshata Rao,
• Enrico Gnecco,
• Shrisudersan Jayaraman and
• Hamidou Haidara

Beilstein J. Nanotechnol. 2011, 2, 85–98, doi:10.3762/bjnano.2.10

• Science Center Road, Corning, NY 14831, USA 10.3762/bjnano.2.10 Abstract One key component in the assembly of nanoparticles is their precise positioning to enable the creation of new complex nano-objects. Controlling the nanoscale interactions is crucial for the prediction and understanding of the

• the particles, we did not find any differences when manipulating ordered vs random distributed particles. Keywords: atomic force microscopy; intermolecular interaction; manipulation; nanoparticles; precise positioning; self-assembled monolayers; Introduction Nanotechnology, which aims at the ideal